• Automatic hand sanitizer dispensers With dust-proof design, according with GMP standard
  
• liquid hand dispenser wall mounted Infrared sensor control
  
• Disinfection operation is simple and avoids cross infection
  
• Apparent fashionable style of Europe and America
  
• Completely atomization, can save disinfectant and disinfecting time
  
• Replaceable nozzle design and quickly solution to nozzle clogging
  
• Full and less disinfectant warming
  
• Adapts to special disinfectant for hand and skin or 75% alcohol
  
• Extended product lifespan
  

The work incicating lamp is not bright

Reason

The power switch has not put through
The power supply is not connected
The fuse breaks

Action

Turn on the switch.
Check-up the connection
Check-up the fuse

The sanitizer can not work

Reason

Hand is too far away from the induction area.
Induction window is dirty.

Action

Extends the hand from the induction within 8-13cm
Clean the induction window

Nozzle jam

Reason

There is impurity in the liquid
Not using for a long time,impurity jam the nozzle.
If the woriding environment is not clean,the nozzle is very easy to be jammed by the impurity.

Action

Use the funnel to add liquid.
Use proper liquid.
Put the nozzle in alcohol or in the boil water to get rid of the impurity.
Unscrew the nozzle to clean it or change the nozzle.

Liquid dripping

Reason

Liquid overflow

Action

The buzzer alarm the liquid is full.

The spary amount is not enough

Reason

The network voltage is extremely low

Action

The sterilizer can not be used when the voltage is low.You can only use it when the power voltage is AC 220-240V 10%.


Explanation


1 If you can not obviate the malfunction yet after tying the suggested methods,please connect with the franchiser to get further help.
2 You should not to teardown the sterilizer by yourself,otherwise,you will lose the maintenance qualifications.